Product Guidelines and Installation

Home/Product Guidelines and Installation

December 2020

What happens if I don’t use Trims?

2020-12-23T06:41:11+00:00

What happens if I don't' use Trims? The simple answer is, if you do not plan to use Flooring Trims as part of the flooring installation, you are ultimately planning for failure and problems. The natural movement of your installed Clever floors or any floorboard for that matter is to be expected. [...]

What happens if I don’t use Trims?2020-12-23T06:41:11+00:00

November 2020

The importance of Underlay Selection

2020-11-02T04:54:18+00:00

Selecting the right Underlay for your purpose is of great importance,  as it can help in the reduction of heat loss, therefore keeping your energy bills to a minimum and keeping the home warmer. If maintaining minimal noise impact is important when choosing the right underlay for your purpose, then [...]

The importance of Underlay Selection2020-11-02T04:54:18+00:00

Why are my floors scratched?

2020-11-02T04:42:13+00:00

There are numerous reasons why your floors would be showing scratches. Read on to discover the possible causes, and how to avoid your floors being scratched. Possible causes: Heavy Furniture being dropped or dragged along your floors Chair and lounge legs being moved and dragged around Pets claws are not [...]

Why are my floors scratched?2020-11-02T04:42:13+00:00

October 2020

What do I need to know about Moisture affected floors?

2020-10-12T04:54:27+00:00

The ATFA on the 14 August 2018 held a technical webiner on 'Moisture Affected Floors'. This was such a great resource it is worth sharing with you. You will need about 1 hour to learn a great deal about moisture and flooring, including: - how to identify moisture - precautions [...]

What do I need to know about Moisture affected floors?2020-10-12T04:54:27+00:00

Why are my floors gapping?

2020-10-17T08:39:09+00:00

There are a couple of reasons why your floors would be gapping. Read on to discover the number 1 possible cause, and how to overcome gapping in floors. Possible causes: Installed outside guidelines without trims Overcoming the problem ​ Rectify installation so it is in accordance with guidelines. Ensure expansion [...]

Why are my floors gapping?2020-10-17T08:39:09+00:00

September 2020

Why are my floors lifting and experiencing vertical movement?

2020-10-17T08:40:18+00:00

There are numerous reasons why your floors would be lifting and experiencing vertical movement. Read on to discover the possible causes, and how to overcome lifting and vertical movement. Possible causes: Installed outside guidelines Installed outside guidelines and without trims Moisture Overcoming the problem: Rectify installation so it is in [...]

Why are my floors lifting and experiencing vertical movement?2020-10-17T08:40:18+00:00

Why are my floors cupping and warping?

2020-10-17T08:40:47+00:00

There are numerous reasons why your floor would be cupping, darkening, and warping. Read on to discover the possible causes, and how to overcome cupping, darkening, and warping. Possible causes: Moisture Overcoming the problem: Find and eliminate the source of moisture. Wipe up any spills or messes immediately. Install a [...]

Why are my floors cupping and warping?2020-10-17T08:40:47+00:00

Why has my floor changed colour?

2020-10-17T08:41:14+00:00

There are numerous reasons why your floor changed colour. Read on to discover the possible causes, and how to overcome changes to colour. Possible causes: No blinds installed Floor exposed to direct sunlight for long periods of time Rugs and mats have been left in the same position for longer [...]

Why has my floor changed colour?2020-10-17T08:41:14+00:00

What happens with variation in sub-floors?

2020-09-07T07:24:11+00:00

Excessive sub-floor variation leads to: Excessive deflection of the panel underfoot Crackling noise associated with movement within the edge joint Excessive drum sound associated with foot traffic Board joints coming apart in floated floors

What happens with variation in sub-floors?2020-09-07T07:24:11+00:00
Load More Posts
Go to Top