Clever Classic Laminate Flooring
Classic Satin Laminate Flooring
Classic Gloss Laminate Flooring
Learn about our Clever Classic Laminate Ranges
Clever Classic Laminate
|Specifications||Classic Gloss||Classic Satin|
|Board Size (W x L)||164mm x 1213mm||196mm x 1215mm|
|Thickness||12 mm||12 mm|
|Pack Size||1.5915 mm||1.667 mm|
|Boards per Pack||8 boards||7 boards|
|Finish||Gloss Smooth||Satin Embossed|
|Grade & Colour variation||Gloss 7 Patterns & upto 21 variations||Satin 6 Patterns & upto 18 variations|
|Profile||Clever Click||Clever Click|
|Construction||HDF Core||HDF Core|
|Raft Size (W x L)||8m x 12m||8m x 12m|
|Perimeter Gap & Coverage -min||9mm & 9mm||9mm & 9mm|
|Moisture Protection||48 hours||48 hours|
|Under Floor Heating||Yes||Yes|
|Floor Level ovew 2 m||2 mm||2 mm|
|Direct UV and Heat Protection||High 4 hours||High 4 hours|
|Climate & Environment Control||Medium||Medium|
|Wear Resistance||Residential – AC3||Residential – AC4|
|Residential Warranty*||30 years||30 years|
|Medium Commercial Warranty*||5 years||5 years|
|*The information and data presented is believed to be accurate and has been compiled from sources believed to be reliable at the time of preparation. Full warranty terms and conditions and product guidelines are available for download on the Clever Choice Website www.cleverchoice.com.au.|
Clever Classic Laminate Collection
The place to download all our product test reports, Material Safety Data Sheet, and other relevant documentation related to Laminate flooring.
For the Long Term Performance of your Floors
Read all about how you can care and maintain your Lamainate floors, by clicking on the links below.
Click on the link below to view and download the Noise Impact Test Report.
About the Test Reports and Disclaimer
Clever Choice Underlays have been tested by Koikas Acoustics Pty Ltd. The purpose of undertaking these impact noise tests was to quantify the acoustic performance of the flooring systems with selected floor coverings in conjunction with the sub-base being
concrete with suspending ceiling. The acoustic ratings provided in this report are indicative and for comparative purposes only.
Tests were conducted in a residential apartment building located in Macquarie Park, NSW. We were advised that the ceiling/floor system between the residential units is constructed with the following materials:
- Approximately 200mm thick concrete slab
- 80-100mm suspended ceiling cavity, and
- 13mm thick plasterboard ceiling
Test results were compared to the acoustic requirements of Part F5 of BCA (Building Codes of Australia), the standards prescribed by the Association of Australian Acoustical Consultants (AAAC) and City of Sydney Council’s DCP 2012 requirements. All measurements were carried out following the guidelines and procedures outlined in AS/NZS ISO 140.7:2006 “Field measurements of impact sound insulation of floors” with the rating determined as per AS ISO 717.2-2004 “Rating of sound insulation in buildings and of building
Selecting the right Underlay for your purpose is of great importance, it is just as relevant to understand how sound and vibrations travel. Underlay is not the sole determining factor for achieving ultimate acoustic ratings and reduction in transmission of noise.
Acoustic ratings will vary depending on the testing environment/conditions including, materials/structures of the existing ceiling/floor system, room volume, internal layout and workmanship. Even with the same testing environment, acoustic ratings can vary from room to room and so buildings to buildings as no two buildings are identical.
Information gathered and provided by Paxwood Pty Ltd t/a Clever Choice Design Floors is given in good faith as a suggested guide in specifying Clever Choice Underlays, no guarantee or warranty is expressed or implied. No liability is accepted for any loss or damage, direct or indirect that may result from using the information and/or suggestions as actual conditions for use that are beyond our
Any circumstances not covered by our test reports, brochure, or information presented across our website www.cleverchoice.com.au should be referred to Paxwood Pty Ltd t/a Clever Choice Design Floors for any particular attention required.
Whilst all care is taken to ensure accuracy of information provided and displayed, Paxwood Pty Ltd t/a Clever Choice Design Floors cannot guarantee that photos, images, or information displayed is correct and recommends that users exercise their own skill and care with respect to the use of photos and images. Information is provided on an “as is”, “as available” basis without warranties of any kind, express or implied.
Discover more about Clever Classic Laminate Flooring
Stability and Durability – Superior dimensional stability due to high density core and waxed edges.
Timeles – Modern and stylish colours and timber look applique to suit a wide selection of interior design choices and colour schemes.
Installation Ease – Easy installation with our Clever Click design and system.
Easy Care & Maintenance – Due to the boards, scratch & UV resistant coatings, its continued great looks are assured over it’s recommended lifetime, so a quick sweep with soft-bristled broom or vacuum is what you will do as a minimum. (NB: Floors are not designed for use with steam mops.)
Design Choice – Embossed In Register to provide a real timber look to the overall appearance. Adaptable to living areas, bedrooms, offices with a fashionable range of colours, styles, finishes and widths available.
For Peace of Mind – Your flooring investment is secure with solid structural and finish warranties.